 |
10. adjust color balance adjustment layer, the middle tone: -6,0, +3 shadow: -7, +3, -1.
11. color balance, shadows: +4, +5 ,mens timberlands, -2. Shadow: +4, +5, -2 High light: -19, -26, -40.
12. With lightning effect. -
1. Duplicate the layer, Filter - Blur - Radial Blur: the number 71, blur method - zoom, quality - good,
2. to establish a template, struck a car, and then apply dynamic wheel clashes ,
3. Levels - optional color. Plus material, rendering the whole atmosphere, with Dodge to do minor changes, the main diameter of 5, the hardness of the smallest -
1. to find a fold of the background, drag the photos will need to make the background layer, resize and crop, border and background to make it match,
2. Adjust - hue saturation, the whole map: saturation -35 degrees, brightness +10,
3. adjustment layers into a soft mode, the effect of old photos out,
4. hue saturation, the whole map: 0, -80,0
5 Duplicate the layer, hue saturation - color: 340,24,0
6. create a new layer on top, filled with black,
7. Filter - Noise - Add Noise, increase in the old sense, the number of 25%, Gaussian distribution,
8. Blending Mode to Multiply,
9. Image - Adjustments - RP,
10. to remove the border of mottled, Select the border with the rectangle selection tool inside edge, DEL key to delete the profile part of the variegated,
11. clashes with people around the eraser tool variegated -
1. Open the original image, the new layer (Ctrl + Shift + Alt + N), then stamp the visible layers (Ctrl + Alt + Shift + E),
2. into the channel, copy contrast to relatively strong the green channel, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material delay in, the establishment of a mask, wipe the figure
4. establish layer, soft mode, make the sky look better,
5. do surface reflection, Ctrl + T vertical flip, the establishment of a mask, with its own brush to draw the desired effect , Multiply mode effect better, because plans vary,
6. color, adjust according to personal habits, with optional color well,
7.Shift + Ctrl + Alt + E, stamp shown in Figure layer, the layer mode Multiply, and then mask the darker corners of pressure, mainly for the water pressure dark, so the screen more balanced,
8. Filter - Noise - Add Noise, number 3, the Gaussian distribution, color, make the same characters and grainy sky,
9, final material up into the sky
Photo Name: PS in turn hand-drawn pictures,
1. open the original file, according to their own feelings through color adjustment to adjust the film, and then resurfacing, dermabrasion value not too much, (Neat image plug-in)
2. a new layer, color FEE7D6, (according to the film character's skin color to set ), the layer mode to Overlay and 25%, 20% with a brush on the face and neck skin and light coating,
3. features of the detailed work, cutting out the mouth, the emergence copy (Ctrl + J), with Smudge tool to smear on the lip, the lip skin becomes soft and delicate (not too much strength)
4. Create a new layer to the lips and face, color, color FDC1D6, the layer mode to color, the lips and face with a brush to smear the side,
5. with the Dodge tool, the range is a high light exposure of 25% to draw the lip of the high light, with the Burn tool, the middle range, exposure 20%, Contrast enhanced lips,
6. a new layer, color 8E1A25, brush 3 pixels, draw the inside of the inside, and then draw the lip of 2 pixels outside the lines,I actually Zhao 's predecessor rich man ., (high light lines built Dodge mask some)
7. to circle the emergence of the nose, copy, use the smudge tool around the gentle refinement of the nose, then use the Dodge tool range is a high light, exposure 20%, to strengthen the high-light the next part of the nose, and then color 422B2D, 2 pixel brush to draw the nose contours (lines light up with a better tool if to make up for the next)
1. Open the image copy layer, Ctrl + Alt + ~, to be constituency, emergence 3-5. curve brightens, about 18,0
2. Adjust levels: 25,1,20,245. Mongolia version of the clashes and details some of the main characters
3. stamped on the characters to brighten the edge sharpening modified dermabrasion.
4. on the back layer to color balance, midtones: -12, -10, -13 High light: +8,0, -19.
5. back layer into LAB mode,
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%,
7. on the application layer in the new image layer: merge layers, soft mode, transparency of 100%,
8. adjustment layer, on the lightness channel curve adjustments, 5,0
9. on the image to LAB color hue saturation adjustment, full figure: 0, +10,0. Yellow: 0, +35,0 Green: 0, +15,0. Red: 0, -20,0. Blue: +10, +30,0.
10. into Levels: 20,uggs winter boots,1.20 , 245. on the lightness channel to adjust the mask with a circular gradient out at the main characters, and then brush clashes detail.
11. stamped return RGB color, color options available on the image, the red channel: 0,0,0, -30 given rise to the petals on the mask,
12. stamp, the new blank layer, with a white brush to increase sprinkler effectiveness, pen pressure. Hardness of 100% pitch +54% -
-
1. establish Hue Saturation adjustment layer, saturation -49,
2. to establish an optional color layer, red: -49,0, +7, -41. Yellow: 0,0,0 , -23
3. the establishment of the Hue / Saturation layer, brightness -49
4. Optional colors. Yellow: 0,0,0, -26, white: 0,0, +46,0. Intermediate color: 0,0, -6,0.
5. Optional colors. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, noise reduction, sharpening, painting and simple to use tool to repair the knee near spot,
7. plus hidden corners, making a heart-shaped selection, emergence, with the curve brightens. -
-
-
-
1. deducted characters, adjust the photos, note the contrast and color over the photo does not light up the leg in place need to be adjusted
2. adjust the skin color, clothing color, mainly used to adjust layer , then add background material, reflection, etc., pay attention to little feet down the stretch with the Free Transform to adjust the deformation of drops
3. in the legs add high light, high light with pen outlines the location, filled with white Gaussian --- --- reduce the transparency of the blur, you can also fill 50% gray layer of the new mode of soft --- --- Dodge tool to draw with, many roads to Rome, you can easily reach the destination
4 . material, the text with what the final sharpening can -
1. open the file, copy a layer copy of the
2. Select the duplicate layer by Free Transform keyboard shortcut ctrl + t to change the character's face shape which is more slender
3. by Merge Layers (ctrl + e), the cutting tool set so that the screen with the new composition, cut off the extra part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50 yellow - 40, -20, -30, -80, white -0,0,0, -50 intermediate color -0, -5, -5, -5
5. according to curve (ctrl + m) to adjust overall color, RGB full-channel - output 214, enter 174, the blue channel - output 131, enter 124,
6. Image - Adjustments - Color Balance (ctrl + b), the shadow -10,0, +15. High light - 10,0, +2.
7. Stamp tool with the skin around the mouth covered evenly,
8. With the pen to face dark circles and bags under the eyes, the emergence 60, curve to lighten the constituency Dodge bags under the eyes and reduce the expression of facial muscles do not relax,
9. continued emergence constituency 60, curve brightens, the face, full point, the output 146, enter 113.
10. part of the high-light circle out, emergence 60
1. tweak the color cast, bring up a general tone, the establishment of Levels adjustment layer Levels all channels: 0,1.35,255. Levels Red Channel: 0,0.85,255. Levels Green channel: 0,1,10,255 Levels: 0,0.95,255
2. The establishment of the Hue / Saturation adjustment layer to reduce the original image's saturation, Full Figure saturation -30
3. a Photo Filter adjustment layer, the first step in the green is out, this step is to deep yellow with a concentration of 25%, the pattern mode, the original will be more dark dark place, select the channel panel, hold down the ctrl points red channel, to get back to photos selection filter mask is filled black.
4. to establish an optional color adjustment layer, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. To brighten some of the windows, set up the Hue / Saturation adjustment layer to in part outside the window wipe. Hue 260, Saturation 25, Lightness +75
6. Create a color balance adjustment layer, the characters and the surrounding environment to distinguish, then set it in the mask used in the large soft black brush to figure as the central angle wipe it. Levels +20, +20, +40, choose the middle tone
-
! ! ! !-
1. new gray coat, with a curve to adjust brightness, 152,124
2. plucked out the eyes and mouth, to be stressed,
3. lower overall saturation, saturation -56
4 color with a color overlay to the overall tendency,
5. hue and color overlay hidden layers, open the Channels palette, copy the R channel,
6. a new layer paste, and adjust the transparency with a color filter pattern -
7. establish Levels adjustment layer, the first dark and bright areas broadly divided out, the mask using the gradient tool to pull the black and white, black and white from the top right to bottom left corner of the gradient, to the right so far. Full channel 0,0.80,255
8. Plus light, use the , the upper left corner a bit dark, so add a mask to wipe out the upper left corner. Point of light, intensity: 28, focus 52, gloss -100, material 100, exposure 17, the environment 32
9. A new layer of stamped, about light and shade to enhance the contrast, the establishment of Levels adjustment layer, the mask in pull the gradient tool with black and white, black and white from top left to bottom right corner of the gradient, the light is completely obscure the upper right part of the white brush wipe out the mask, and then figure out from the mask in the brush. Levels whole channel. Levels all channels: 0,0.80,255
10. Sharpening, a little dermabrasion, add the word, complete. -
Photo Name: post-look Raiders,
Photo Name: seaside beach,
-1. Duplicate the layer blend mode to Screen,
2. coating 2 mask reverse clashes eyes
3. stamp (alt + ctrl + shift + E)
4-channel mixtures, select the color, red +54, green +54, blue +32
6. mixed mode - are stacked
7. adjustment of seal layer, Image - Adjustments - Shadow / high light - Shadow: 50,50,144
high light: 0,50,30
middle tone: 20,0
0.01,0.01
1. Open the original image, duplicate the layer,Questions to collect, fill the pure black, overlay mode.
2. New Hue Saturation layer: saturation -85.
3. New Brightness Contrast layer: Contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0 The middle color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, gloss 0, the material 69, 0 exposure, the environment 8,
6. stamp, plus text-decoration -
-
-
-
23. delete the pupil part
24. with eye color curve adjustment, so that the same
25. plus eyes high light
26. circle the lips, emergence 2, high-gloss lips curve adjustment, adjust the lips color
27. Lianggao Guang adjust nose, eye shadow highlight adjustment
28. with optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, coupled with lens flare, light 182,wholesale gianmarco lorenzi,35 mm focus,
31. Finally, where appropriate, brush with flash complete
1, this effect can be directly transferred with a curve out over the whole channel is about 1 / 4 frame,
channel -105.125 green, and blue channels 151.254
2. with the black side of the lens correction added. add noise , which Vignette - the number of -28 (darken), focusing on +5,
3. with the brush tool on the Internet under a scratch of the pen in the picture above and then click Merge Layers
4. add noise, number -2.45
5. to make a side -
-
-
1. sketched with a pen in the back of a wing shape,
2. in the current working directory into the path 1, double-click the work path.
3. the path into a selection (Alt + Enter), copy the layer, feathering 3 pixels,
4. filled with white, select the appropriate intensity of use of the smudge tool, apply the appropriate edge.
5. Duplicate the layer and fill different colors can be combined layer 1 are different, adjust the transparency of the Oh layer properties,
6. in accordance with the previous method of production of the second wing, adjust the appropriate transparency, can black and white gradient adjustment layer and mask adjustment,
7. a new layer, draw a circular selection, using the brush in the constituency circle, adjust the appropriate transparency,
8. copy paste into the new background layer Alpha channel, in addition to other places outside the top left corner filled with black, use Filter - Blur - Radial Blur: the number 90, blur method: zoom,
9. Choose Alpha Channel (the channel on hold Ctrl), in Fig. floor area new layer, fill light yellow,
10. with a pen to generate the beam path, the path into a selection, yellow and white gradient fill color,
11. adjustable transparency, light rub with the eraser at the bottom, is light becomes natural,
12. people who sketched with a pen in the light path, the path into a selection, the edges of strokes with a painting, adjust transparency, combined with the eraser and smudge tool will achieve better results, spend more Several halo effect will be better -
-
1, open the original image, copy the layer
2, curve adjustments, the value RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color balance , values: 0,0, -34
5, optional colors, neutral colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56 %,
7, the cloud material dragged into the diagram, into the original image above, soft layer model, the outside part of the sky in addition to wipe out, back layer (Ctrl + Alt + Shift + E)
8, optional colors, black: 0,0, -14, -5
9, a new layer, fill 0d1d50, excluding layer mode, copy layer, filling 52%
10, curve adjustment, the value RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, Levels, value: 29,1.00,227, filling 58% < br> 13, optional colors, neutral colors: +16, +12, -11, +5
14, back layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46%, filling 48%,
16, Ctrl + E Merge Visible, Sharpen about
Photo Name: younger characters deal with a delicate skin,
-
1. Open the original image, copy the layer, Image - Adjustments - Desaturate
2. filter - Artistic Effects - plastic packaging, according to the Original reducing transparency
3. to adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, to extract high-gloss black and white layer selection, money becomes small eyes, hidden, back to the background layer,
5 Put the front to be selected to adjust the high-light curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or about the appropriate tone color, brightness, +4, contrast +7-
-
-
14. draw the texture to the hair, the new layer, layer mode to Overlay, choose the pencil is 1 pixel, (picture size to the value determined according to figures), along the hair color is DFDFDF draw smooth texture lines
15. cauda some choose the brush tool, brush lightly with a fork along the texture of some of the painting, the color layer pattern above,
16. a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% of flow, color is white, draw forehead dynamic hair,
17. clothes and necklaces with the smudge tool coated some of the softer, and then choose to use the Dodge tool, the range is the high light exposure 20%, clothes and necklaces to enhance the high-light some
18. synthesis, on the whole image sharpening, sharpening is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)
Photo name: bring up the photo a beautiful red and yellow,timberland boots,
1, open the original image material, Ctrl + J to copy the background layer to layer, press Ctrl + Shift + U to color, run: filter Mirror> Blur> Gaussian Blur, number 4, the layer blending mode to Screen, layer opacity to 27%.
2, create a new layer, press Ctrl + Alt + Shift + E back layer, layer blending mode to color. 3, create a Gradient Map adjustment layer, purple - orange, Alt + Ctrl + G with a clipping mask.
4, create brightness / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 create a Levels adjustment layer, 8,1.00,255
7, to create an optional color adjustment layer, red: +17, -8, +16,0, yellow: -54,0, +10, + 18, white: -5,0,0,0,
Photo name: bring up the nostalgic landscape photos,
1. Duplicate the background layer. Filter - Blur - Gaussian Blur with a radius set to 10.
2. set the layer blending mode to Double-click the layer name to open the right mixture of options. In the advanced hybrid, a senior cancel the R and G channels,
3. The use of color balance the image of the curve, according to the picture to determine
4. A new layer, select the Repair Brush (J), select level sampling. Of large freckles or blemishes, removal of imitation.
5.ctrl + shift + alt + E, stamp all the layers, the skin part of the tick, you can choose their own way, I personally prefer the pen tool, but you can also use the polygonal lasso tool, to Note that to deal with the skin, so to remove the eyes, eyebrows, lips, nostrils. Anti-selection (ctrl + shift + i) Remove all but the skin, extra parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass radius of 4, mixed mode as >
Photo Title:
1. Open the original image, copy the biggest contrast of the blue channel,
2. and then further increase the contrast with Levels, the purpose is to just let the stone at different levels
3. to adjust a good blue Copy to copy the layer inside the channel, and you want to add color, I used the deep orange
4. to copy the red channel to the base map layer, with the sky and the stone mask removed, leaving only grass and to add color with the Gradient Map
5. open the material ball lightning, copy the red channel contrast to just the largest file
6. Select the layer blend mode to Overlay and adjust the position and size, making it a light source, remove some extra stuff (to decide), then use the radial blur filter to handle about radiation, allowed the formation of emitted light beam
7. to copy the base map of the channel inside the red channel to enhance the contrast, so The high light some of the grass revealed more clearly, and then choose Paste to a layer of high light part of the inside, filled with white, the layer mode to overlay, then use the mask to remove the white part of the sky, leaving only part of the grass, the grass appears to be bright light of the light sense
8. Select Layer 1 and then invert the mask, get the sky's constituency, adding curves and Hue / Saturation adjustment layer and adjust according to personal preference and the purity of their favorite colors
9 Finally add some posters elements, so fake posters look real point in the use of color, I try to choose the gold and the color of the stone embellishment, so that the color has been echoed among
-
1. Duplicate the layer, soft mode of the layer to optimize the use of soft
2.Ctrl + U adjust hue saturation, the color of the leaves with a pipette, to change the hue of the season has reached the transformation purpose, we need the feeling of winter, to find the leaves of the hue, brightness will be adjusted to the light.
3. Note that brightness slider tolerance under which the details, you can select constituency reduce saturation, hue can also be used to improve brightness, color range is used here to close duplicate the layer with the background layer to the color range.
4. constituency returned copy layer selected, emergence, saturation of the selected part will be 0,
5. snow the feeling of the figures in the anti-selection, you can use the color range, you can also use the hue saturation, and finally add contrast, wipe out some clothes.
6. some of the snow a bit stiff for snow to be a fuzzy overlay, with the contrast of the copy layer selected, change the overlay mode, in contrast to copy the layer below,
7. overall rate of a contrast, with given rise to a large brush perspective about the relationship, not including figures, giving details of the snow. -
8. eclosion circle replication of the eye brow, eye brows with the smudge tool for the refinement of the surrounding skin soft, then use the dodge tool range is a high light exposure of 15%, to strengthen the high light under the eyes, use the Burn Tool the middle range, deepening the lines around the eyes,
9. with the smudge tool to smear on some detailed eyes, look more softer, with some better tools to deepen the black eyes, with the Dodge tool range is a high light exposure 20% degree of enhanced high-light some eyes, to make the eyes look brighter,
10. color 080101, 3 pixel brush, draw eyelashes part (lines Dodge tools to deepen the color depth can be used to make up) eyelash line can also be used path and some other method of tick,
11. eyebrow with the smudge tool to apply some of the beautiful, his brow a little rough spots slightly darker color, apply fade down along the back, then two pixels with a brush to draw in the eyebrow eyebrows front lines, so eyebrows more structured,
12. smudge tool to choose hair brush, (according to the texture of the hair brush shape set), apply the process to apply along the hair texture, not too much force to be applied uniform,
13. hair brush applied partly to the normal interface, the (hair must be applied carefully)
11. curve brightens, the face, full point, the output 138, enter 118.
12. eyebrows, the eyebrows and the skin with the lasso tool with the top circle, the emergence 5, copy the layer, the Duplicate the layer and move down in order to achieve eyebrow shaping role, stamp eyebrows, this must be very careful
13. eyes began to adjust, select the eye part of the circle out, copy the layer
14. a pen to circle done eye shadow region, copy layer, the pressure curve of the dark color to adjust,
15. then the eye shadow color a unified, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. Details of color adjustment, the upper eyelid 1 / 3 part, Hue Saturation: 0, -40,0
17. Circle detail, the upper eyelid lashes root at the lower eyelid before the eyes 1 / 3, press the DELETE key to delete the selection, the exposed high-light position,
18. remove some more eye shadow, feather 40
19. circle detail on the inside corner to the eyelid 1 / 2, press the DELETE key to delete the selection, so exposing Highlight
20. Circle the eyes, copy the layer, emergence 1, whites some desaturation, back mottled, hue saturation: 0 -50,0
21. whites details of the adjustment curves adjustment to increase the light,
22. eyes to copy a layer transfer curve after light, brush pen on the back half of the left eye, showing some shadows,
-
1, open the original image material, press Ctrl + J to copy the background layer to layer, point channel panel, select the blue channel, the image> apply image as the background layer, mixed to Multiply, Opacity 50%, reverse tick,
2, back to the Layers palette, create a curves adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black, layer blending mode to Multiply, Opacity to 60%, choose the Elliptical Marquee tool to the middle part of the selection, press Ctrl + Alt + D Feather, a value of 70, and then double-click the Delete key to delete, resort to the text, complete the final the effect.
-
1. Copy a layer into a Smart Filter, you can filter for the purpose of effect of adjustment
2. Filter - Render - Lighting Effects, all light, negative 17, Matte -25, 100 plastic effect, exposure of less than 32, negative 28,
3. New optional color adjustment layer, red: -100, -3,03,air jordan 2,0. Yellow: -59, -6, -23, +1 Green: +9 , +5, -100, +27. Cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Intermediate color: +16, -18, -18, -3. Black: 0,0,0, +28 -
-
-
-1. the photo to open, to find some form similar to the castle.
2. will be deducted from the house and into a new layer. You can use the Polygonal Lasso tool to select housing, and through a relatively soft eraser tool to erase the background.
3. now need a new background, from the material library to pick a
4. the back of the house into the sky (sky layer into the layer below the house), and add a little perspective distortion effect of the sky to increase the depth of the background.
5. observe the edge of the house, where there are still some left in the original color of the sky above.
6. layer with the magic wand select the house empty place, then do Select> Modify> Expand command to expand the range of options, enter an appropriate value of the range of options to include the need for color correction of the house edge. Executive Image> Adjust> Hue / Saturation command to adjust the color of the edge of the roof of the same color.
7. continue to use the Hue / Saturation to adjust the housing and the color of the sky, so that they can coordinate with each other integration.
8. once again stamped
9. wipe the right cheek with the seal of the sun
10. with the Dodge tool - the range of high light intensity of 50%, struck a reflective eye, just rub the eye black,
1. Duplicate the layer and into the channel, copy the red channel, a copy of the curve to adjust the red channel input 100, output 3,
2. with a brush or selection tool, the characters and filled with white flowers,
3.Ctrl + click on the red copies, making it into a constituency, remove red copy, return to the Layers palette,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers matting complete,
5. Methods I: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation coloring, the new hue saturation adjustment layer, color playing in front of hook, Hue = 345, Saturation = 60, brightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: new color balance layer midtones - Levels: +100 , -54, -20 / +100, -35, +43
shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21, -23, - 5. Magenta: -100, -45, +32, -1
8. Gradient Map use, the new Gradient Map 1,硅胶工厂, layer to color -
-
1. Open the original image, copy the layer, Image - Adjustments - Desaturate
2. filter - Artistic Effects - plastic packaging, according to the Original reducing transparency
3. to adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, to extract high-gloss black and white layer selection, money becomes small eyes, hidden, back to the background layer,
5 Put the front to be selected to adjust the high-light curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or about the appropriate tone color, brightness, +4, contrast +7-
8. will have to remove the palm trees next to the house, with the Clone Stamp tool to copy tiles to draw out the house floor and second floor between the parts.
9. add a flash of lightning to add tension to the screen. With no feathering the brush to draw a lightning effects, copy to a new layer, add a glow effect. Then use the dodge tool to highlight the roots of lightning clouds.
10. with pictures drawn by hand around the house or add some dead tree, remember to adjust color and brightness.
11. To make the house look more worn, draw on the roof of a hole.
12. Continue adding damage effects. Broken beams and aqueduct, another roof and glass breaking. After the break things, to use Clone Stamp tool to fill the place vacated
13. Add some stains. First, the windows, with an irregular brush to add some variegated glass. Then change the layer blending mode stains and glass to make it a good mix. In this tutorial I use the brightness modes.
14. for the entire house to repeat the same steps, using a deeper color and layer blending mode set to overlay mode. Attention to seams and edges, this place is the most prone to stains.
15. porch enlarged detail.
-
-
-
1. Select the blue channel
2. channel mixer, check the
3. dermabrasion, body beautifying people.
4. to people with skin and clothing, parameter default; use after effect is blue, but also use the
6. to effect step 6 mixed-mode to
8 ..
9. fine-tune what people face color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The -
1. Duplicate the layer and adjust the brightness, contrast, Merge Down,
2. into LAB mode, select the image using an image, to calculate,
3. the layer mode to color, cover printed layers,
4. into the RGB channel, blue channel will be filled with black, extract green channel selection, will fill the selection with white,
5. hue saturation, red: +20, +1,0. Cyan: -7, +26,0 Other data without moving the layer mode to color,
6. into the RGB channel, select the green channel selection, anti-selection, color balance adjustment layer, select the middle tone , values: -10, -6, +16. shadow: +4, +5, -2 High Light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel constituency, copy, paste it back to RGB mode, layer mode to Color, select the curve adjustment layer, the red channel: 173,193. Red Channel: 58,56. Green channel: 180,201. Green Channel: 53,58. Blue channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, layer mode to brightness, transparency 20%
9. Select the adjustment layer hue saturation, cyan: +5, -49, -2.
1. into the channel panel, then use the
Channel Green - Mixed Multiply, Opacity 20%
channel red - mixed dark, opacity 100%
2. Adjustments - Color Balance - high light - Levels: -8, +13, +11
3. blue channel during the time the application image layer: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel a little bit, < br> Blue channel all channels 6,0 4,15
5. copy a layer copy of the out, again the blue channel of operation, mixed Multiply, Opacity 50%
6. the last thing to do is prominent figures, and with the eraser, given rise to some people, pay attention to the appropriate lower transparency. -
Photo name: bring up the photo a soft blue and yellow - a simple way,
-
1. create a new layer, fill light yellow, overlay mode, the value 247,240,197
2. copy just the yellow layer, Linear Burn mode, the mask given rise to a yellow car, avoid car color through yellow,
3. adjust brightness, contrast, color high light part of the normal subject and exposure, brightness -20, contrast +64, the new Saturation adjustment layer, saturation -31. to determine the daylight brightness of the final order high light at the color and detail prevail in the dark can be ignored,
4. Duplicate the background layer high-gloss shadow adjustment, the best place to shadow detail as the base, the shadow: the number 100, the tone width 33, radius of 102, high light: the number of 0, the tone width 50, radius 30, to adjust: Color Correction +20, midtone contrast of 0, 0.01% black construction, the construction of White 0.01%
5. Duplicate the background layer to adjust brightness of the sky, make up the sky with a layer over the exposed deficiencies,
6.-tuning the details, to wipe wire the sky, the Healing Brush Clone will do,
7. Flatten Image, fine-tune the details Sharpen -
1. in RAW to adjust the brightness, contrast, after adjustment for the laying the foundation,
2. join Sky material, simple transparency, make the sky into layers,
3. New Adjustment Layer optional colors - neutral color: +20, +6, +7, -4, absolutely, a little water color uniform,
4. filled with khaki color, opacity 54%, dark blue fill color, opacity 61 % fill deep purple, opacity 76%,
5. fine-tuning, high light and middle tone selection method and the resulting mask, high light selection method: calculation - Source 1: layers merge layers, gray channel, the source 2: The layers merge layers, gray channel, Multiply blend, opacity 100%.
6. midtones selection methods: Source 1: Merge layers, gray channel, source 2: Merge layers, gray channel, Multiply blend, opacity 100%.
7.RGB aisle to get the mask, use the curve adjustment, high light adjustment: the black box on the left in the penultimate line of the middle line, the blue line going down a little, midtone adjustment: up to adjust some,
8. reflected light mask, lasso select constituency, emergence, as a whole provides bright,
9. ship's debris to reduce saturation, Saturation: -36,
10. sharpening the whole -
