Fiberstore supply the Cisco SFP+ transceiver. The Cisco 10GBASE SFP+ modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.And the Cisco compatible SFP plus transceiver: SFP-10G-SR, SFP-10G-LR(LRM), SFP-10G-ER, SFP-10G-ZR. Compatible Cisco SFP+ cables : Cisco SFP+ 10Gb Direct Attach Passive Copper Cable 1M, 3M, 5M, 7M, 10M.
The SFP-10G-SR series multi-mode optical transceiver is SFP+ module for duplex optical data communications such as 10GBASE-SR and 10GBASE-SW. The SFP 10G SR Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP 10G SR SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.The Cisco 10GBase-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible.
10GBASE-SR at 9.953Gbps
10GBASE-SW at 10.3125Gbps
1000 Base-SX Ethernet
2XFC at 2.125Gpbs
1xFC at 1.0625Gbps
8XFC at 8.5Gbps
4XFC at 4.25Gpbs
Duplex LC Connector Interface, Hot Pluggable
850nm VCSEL Transmitter
Other Optical Link
Fiberstore always be a good fiber optics supplier,we produce and stock for a full range of optical transceivers in china. All our fiber transceivers are 100% compatible with major brands like Cisco, HP, Juniper, Nortel, Force10, D-link, 3Com, and backed by a lifetime warranty. And we also can customize optical transceivers to fit your specific requirements.
