10G SFP+ or 10GBase SFP Plus is a kind of multi-purpose optical transceivers. It is a popular module widely used for 10Gbit/s data transmission applications like data center, enterprise wiring closet, and service provider transport applications. Working wavelength of 10G SFP+ transceivers can be 850nm, 1310nm and 1550nm according to the models with different transmission distance. 10G SFP+ is ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fiber Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE- SW/SR/LR/ER, 1000 Base-SX Ethernet.

Basically, SFP plus is the enhanced version of the SFP (small form-factor pluggable), which supports data rates of up to 10Gbit/s Fiber Channel and Ethernet applications. It leaves more circuitry to be implemented on the host board instead of inside the module compared with the earlier XENPAK or XFP modules.

Ingellen Technology Co., is one of the main Fiber Optical transceivers manufacturers in China, providing a variety of SFP plus transceivers, 10G SFP + is among the hottest ones. Take SFP+ 10G 850nm 300m, model IN13001 for example. This is a 850nm 10G SFP plus transceiver that designed for transmit and receive optical data over 50/125μm or 62.5/125μm multimode optical fiber with 300m distance. The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

Features
Optical interface compliant to IEEE 802.3ae 10GBASE-SR
Electrical interface compliant to SFF-8431
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MM
Very low jitter
Operating case temperature: 0c to 70C
Low power consumption
All-metal housing for superior EMI performance
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth

Application
10GBASE-SR at 10.3125Gbps
10GBASE-SW at 9.953Gbps
Other optical links
This is only a typical 10G SFP+, more related 10GBase SFP plus transceivers are also available at Ingellen like SFP+ 10G 1310nm 220m, SFP+ 10G 1550nm 40km, and more. As an experienced fiber optic manufacturer with powerful technician backups, Ingellen is capable to customize the completely Cisco compatible 10G SFP+ transceiver according to our customers'requests. Our Cisco SFP+ Transceivers includes Cisco SFP-10G-SR, Cisco-10G-LR, SFP-10G-ER, SFP-10G-ZR and more.