Copper SFPis the small form pluggable transceiver modules which use a copper line for linking. Typical copper SFP products like Cisco GLC T and SFP GE T, these SFP modules are used in Gigabit networks and they are fully compatible with 1000Base-T. SFP GE T is the copper SFP that are with extended working temperature and DOM support.

Here, Ingellen Co., Ltd.(www.ingellen.com) will introduce its hot-pluggable 1000Base-T copper SFP transceiver which is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab. This copper transceiver supports 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cables. ?This 1000Base-T copper transceiver also supports 1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h. Ingellen 1000Based-T copper SFP is available for RoHS compliant products and is completely compliant with SONET/SDH recommendations for OC -48 specifications.

The 1000Base-T SFP copper transceiver, model IN15001 is composed of two sections: a transmitter section and a receiver section. The transmitter section incorporates FP and a driver IC with temperature compensation and an automatic power control circuit. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and trans-impedance with AGC for wide dynamic rage.

Features:
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Extended case temperature range (0°C to +70°C)
Fully metallic enclosure for low EMI
Low power dissipation (1.05 W typical)
Compact RJ-45 connector assembly
Access to physical layer IC via 2-wire serial bus
1000 BASE-T operation in host systems with SERDES interface
10/100/1000Mbps compliant in host systems with SGMII interface

Applications:
1.25 Gigabit Ethernet over Cat 5 cable
For more information about this 1000Base-T copper SFP transceiver or copper SFP 1000M 100m(UTP5) from Ingellen, please visit www.ingellen.com or to purchase this product online. For more inquires please contact our sales department:
Email: [email protected]
Tel: +86 755 8326 9350